VIM2 MAX SBC Board
VIM2 Basic SBC Board
VIM2 спецификация
| Model | Max | Basic |
| SoC | Amlogic S912 1.5 GHz 64Bit Octa Core ARM Cortex-A53 750MHz ARM Mali-T820MP3 GPU HW UHD H.265/VP9 60fps 10bit video decoder HDR10 and HLG HDR video processing | |
| MCU [1] | STM8S003 with Programmable EEPROM | |
| SPI Flash | 2MB | |
| DDR4 | 3GB | 2GB |
| EMMC | 64GB | 16GB |
| Wi-Fi [2] | AP6359SA, 2X2 MIMO with RSDB [3] | AP6356S, 2X2 MIMO |
| Bluetooth | V4.2 | V4.1 |
| LAN | 10/100 / 1000M | |
| WOL [4] | Wake up & on Lan | |
| IR Receiver | 2 Channels | |
| HDMI 2.0a | Type-A Female, up to 4K@60Hz | |
| HDMI CEC | Yes | |
| TF Card | Molex Slot | |
| USB2.0 HOST | x2 (900mA & 500mA Load) | |
| USB Type-C | USB2.0 OTG & DC IN | |
| Wide Input Voltage | Range from 5V to 9V, Recommend 5.0V | |
| Current Limit Switch | Programmable, 3.0A as default (up to 4.0A) | |
| VIN (Extra Power IN) | 4-Pins, 1.25mm Pitch Header | |
| RTC & Battery Header | 0.8mm Pitch Header | |
| Cooling Fan Header | 3 Levels Speed, with a 0.8mm Pitch Header | |
| 40-Pins I/O Header | 2.54mm, USB, I2C, I2S, SPDIF, UART, PWM, ADC, ISO7816 | |
| FPC Connector | 10-Pins, 0.5mm Pitch, with I2C, IOs | |
| Pogo Pads Array | USB, I2C, DVB-Bus, IOs | |
| Pogo Pads MCU | SWIM, UART, ADC, NRST | |
| Pogo Pads for VIN | System Power Input | |
| Buttons | x3 (Power / Func / Reset) | |
| LEDs | Blue LED x1, White LED x1 | |
| Mounting Holes | Size M2 x 4 | |
| Board Dimensions | 82.0 x 57.5 x 11.5 mm | |
| Android | Nougat (7.1) | |
| Ubuntu | Ubuntu 16.04+ | |
| UEFI [5] | Developing [6] | |
| [1] MCU: Power management, EEPROM for customization, and boot media(SPI Flash or eMMC) setup. | ||
| [2] Wi-Fi: All models feature with 802.11a/b/g/n/ac. | ||
| [3] RSDB: Real Simultaneous Dual Band, which lets VIM2 and other devices transmit and receive data over two bands at the same time. | ||
| [4] WOL: Power on or wake up VIM2 remotely over Lan through APP or webpage. | ||
| [5] UEFI: Similar with traditional BIOS, UEFI is a specification that defines a software interface between an operating system and platform firmware. | ||
| [6] The UEFI for VIM2 is still at the developmental stage and will be released once finalized. | ||